Lean To House Warc Studio
2016-11-28 17:00
© Aaron Pocock
c.亚伦·波科克
架构师提供的文本描述。这个项目是由Warc工作室建筑师为低预算改造和增加一个独立的1960年的房子在墨尔本郊区的奥克利,澳大利亚。该网站有一个缓坡后和东方方面。项目简介要求提供新的后方居住空间以及一些内部修改。
Text description provided by the architects. This project by Warc Studio architects is for low budget alterations and additions to a detached 1960's house in the Melbourne suburb of Oakleigh, Australia. The site has a gentle slope to the rear and an Eastern aspect. The project brief required the provision of new rear living spaces as well as some internal modifications & rectification work to the existing residence.
© Aaron Pocock
c.亚伦·波科克
Floor Plan
© Aaron Pocock
c.亚伦·波科克
该设计方案是由资源效率驱动的,这对于实现经济和可持续目标至关重要。
The design program was driven by resource efficiency which was essential to delivering both economic and sustainable objectives.
© Aaron Pocock
c.亚伦·波科克
这些附加物的形式借鉴了似乎无处不在的倾斜到单螺距屋顶结构,这种结构盛行于1950至1960年代整个地区的房屋。在这种情况下,两种不同坡度的单螺距屋顶形式被并列在一起,形成新的居住区域,跨越房屋的后方,并向花园开放。由此产生的屋顶形式提供了一个紧凑的建筑围护结构:附加物的表面积比采用相同建筑体积的平顶/平顶解决方案所需的面积小约12%。这反过来又意味着热包膜效率的提高和资本材料消耗的减少。被动太阳辐射是由战略位置的开口管理,以及一个自动操作的屋顶窗口在天花板顶端,使任何热空气迅速消散。层合木鳍的结构体系同时提供结构,完成表面和遮阳,以实质的玻璃区域面对花园,因为太阳向北过渡。层合木鳍是由无砷的H3处理的层合辐射松木制成的,这是一种高度可持续的资源,来源于离场地不到4小时车程的种植园。除染色外,不需要额外的衬里、底物或鱼翅的点缀。所需钢材最少。屋顶内衬白色钢板衬里,以尽量减少夏季的热量。
The form of the additions draws reference from the seemingly ubiquitous lean-to mono pitch roof form structures prevalent at the rear of 1950 - 1960’s houses throughout the area. In this instance, two mono pitch roof forms with differing gradients were juxtaposed to form new living areas that span across the rear of the house and open to the garden. The resulting roof form provides a compact building envelope: the surface area of the additions are around 12% less than if a flat roof / flat ceiling solution had been employed with the same built volume. This in turn translates to increased efficiency of the thermal envelope and reduced capital material consumption. Passive solar radiation is managed by strategically placed openings as well as an automated operable roof window at the ceiling apex which enables any hot air to quickly dissipate. A structural system of laminated timber fins simultaneously provides structure, finished surface and sun shading to substantial glazing areas facing the garden as the sun transitions Northward. The laminated timber fins are constructed from arsenic free H3 treated laminated radiate pine – a highly sustainable resource sourced from plantations within 4 hours drive of the site. Other than staining, no additional lining, substrate or embellishment of the fins was required. Minimal steel was required. The roof was lined with white steel sheet lining that minimizes heat gain in summer.
© Aaron Pocock
c.亚伦·波科克
在现有房屋中,对拥堵的规划进行了修改,以创建一个定义的中央通道,该通道服务一系列翻新的空间,包括洗衣房、书房、浴室和套间浴室。通过连接并描绘原始房屋与新添加的胶合板滑道以及将新生活区域连接到研究的滑动面板,便于空间互连。
Within the existing house, the congested planning was modified to create a defined central passage that services a series of refurbished spaces including a laundry, study, bath room and ensuite bath room. Spatial interconnectivity is facilitated through a plywood “chute” that connects and delineates the original house from the new additions as well as a sliding panel that connects the new living areas to the study.
© Aaron Pocock
c.亚伦·波科克
完成的项目成功地满足了严格的预算限制,同时超过了法定的可持续性要求。
The finished project successfully met tight budget restrictions while exceeding statutory sustainability requirements.
Architects Warc Studio
Location Oakleigh, Australia
Category Renovation
Architect in Charge Andrew Wilson
Area 182.0 m2
Project Year 2016
Photographs Aaron Pocock
Manufacturers Loading...
下载