“Roseroc”作为员工自助餐厅和具有餐饮功能的员工活动大厅而创建。该公司的主要部门是制造用于医疗目的电缆和导管，而“roseroc”是在这些工厂的厂房内建造的。“roseroc”主要用于三个主要用途-作为员工自助餐厅，在那里他们可以舒适地度过午餐休息时间，并在清洁室花费大量时间制造电缆和导管后感到神清气爽，然后，作为一个多用途的空间，员工可以使用该区域进行会议、娱乐活动等等，最后，作为该公司的象征人物，渴望打入国际市场。

"Roseroc" is created to function as an employee cafeteria as well as an employee  activity hall with catering functions. The major sectors of this company are the manufacturing of cables and catheters for medial purposes and the  “roseroc” is built in the premises of those factories. "roseroc" needed to function mainly for 3 major purposes - as an employee cafeteria where they  can spend their lunch break hours comfortably and feeling refreshed after dedicating  a lot of their time manufacturing cables and catheters in the clean room, then, as a multiple purpose space where employees can use the area for meetings, activities for recreation purposes and so on, and lastly, as a symbolic icon of the company who is eager to penetrate into the i

 © Satoshi Asakawa

(3)Asakawa Satoshi Asakawa

 © Satoshi Asakawa

(3)Asakawa Satoshi Asakawa

考虑到提供“roseroc”的地区是一片空置的工厂用地，我们很幸运，那里已经长出了高大的树木，我们可以利用附近一座山的景观。为了充分利用这个地区在开始规划所需的设施、公用设施和用具时已经具备的自然环境，我们决定建立一个从外面开始的长而持续的墙，然后是外部(“豆豆”)花园，然后是室内的房间和其他设施，当墙到达里面(“uchi”)时结束。这堵又长的墙反映了公司许多员工的形象，他们在一条大河中朝着他们的目标前进，也反映了公司的未来愿景，在那里，每件事和每一个人都参与其中，成为“一个团队”。

Considering that the area provided for "roseroc" was a vacant lot in the premises for factories, we were quite fortunate that there already were tall tress growing and we could utilize the landscape of a mountain located just outside the area. To make a full use of this natural environment that this area already had when we started planning the necessary facilities, utilities and appliances, we have decided create a long and continuing wall which starts from the outside, then involves the outside ("soto") garden then to the rooms and other facilities inside, and ends when the wall reaches inside ("uchi"). This single, long and continuing wall reflects an image of many employees of the company who move towards their goals in a big stream and the future vision of the company where everything and everyone is involved and becomes "one team".

 Floor Plan

这座450平方米的单层建筑有15米x15米的主宴会厅，午餐时间可容纳250人，只有一堵墙，墙壁连接着柜台式私人房间、厨房空间、贵宾房和两个庭院等所有设施。通过在墙壁上开洞，我们试图创造出每一个空间都在不断联系的气氛。我们希望有大的开口连接每个设施，但不破坏“一堵墙”的轮廓，为了实现这一点，我们决定有三角形的开口。外缘的开口呈三角形，向上倾斜。它们的设计是为了沿着宴会厅的对角线，目的是向外显示方向，墙本身的强烈存在。从建筑方面来看，我们计划为每个洞口的形状做大桁架，为建筑物建造一堵长长的墙。

This 450m2 single-story building with 15M x15M main banquet hall, which can accommodate up to 250 people during the lunch hours, has one single wall and the wall connects all of the  facilities such as a counter style private room, kitchen space, VIP rooms and two courtyards.  By making openings to the wall, we have tried to create the atmosphere that each space is continuously related. We wanted to have large openings which connect each facility yet do not destroy the profile of "one single wall" and in order to realize that, we have decided to have openings with triangle shape.  Openings on the outer periphery wall   triangle shape which are pointing upwards.  They are designed to go along with the diagonal lines of the banquet room aiming to show the direction that goes outer area the strong presence of the wall itself. Looking at the construction aspects, we planned to have large trusses made for the shape of each openings to make a long wall for

 © Satoshi Asakawa

(3)Asakawa Satoshi Asakawa

因此，几乎没有任何垂直柱，因此我们进行了钢模板支架施工，并确定了足够的刚度，当整个节段和混凝土。

Consequently, hardly any perpendicular pillar was made thus we have proceeded the construction using steel-form support and made sure of the sufficient rigidity when the whole segments were set and concrete.

 © Satoshi Asakawa

(3)Asakawa Satoshi Asakawa

Architects Okuno Architectural Planning

Location Hamamatsu, Shizuoka Prefecture, Japan

Category Other

Architect in Charge Masaaki Okuno

Area 444.17 m2

Project Year 2016

Photographs Satoshi Asakawa

Manufacturers Loading...