Kordsa Global
2018-08-25 22:00
© Yercekim Architectural Photography
架构师提供的文本描述。Piramit建筑师为科德萨环球公司的复合技术设计了研究和开发中心,该中心位于蒂诺帕克伊斯坦布尔地区。它是一座混合用途的建筑,由实验室和办公室组成,可以在那里进行研究和开发项目。考虑到其技术功能,结构的棱柱状块状结构可以看作是放置在地面上的一台重型机械。选择深色反光玻璃和涂层金属包层和巨大的质量也增强了这种感觉。
Text description provided by the architects. Piramit Architects had designed the research and development center for Kordsa Global's composite Technologies, which is located within the Teknopark Istanbul area. It is a mixed-use building consisting of laboratories and offices where research and development projects can be carried on. Considering its technical functions, the prismatic massive form of the structure can be thought of as a heavy piece of machine placed on the ground. The selection of dark-colored reflective glass and coated metal claddings and the hefty mass also enhances this perception.
Text description provided by the architects. Piramit Architects had designed the research and development center for Kordsa Global's composite Technologies, which is located within the Teknopark Istanbul area. It is a mixed-use building consisting of laboratories and offices where research and development projects can be carried on. Considering its technical functions, the prismatic massive form of the structure can be thought of as a heavy piece of machine placed on the ground. The selection of dark-colored reflective glass and coated metal claddings and the hefty mass also enhances this perception.
© Yercekim Architectural Photography
建筑面积为17.000平方米,长方形地块为6.200平方米。它集生产、研究、实验室和办公室功能于一体。该中心由生产工程师、技术人员、学生、讲师和孵化器办公室的员工使用,因此,不同群体的需要形成了特殊的空间安排,最终影响了群体的聚集。这些高地被分成两条水平飞行线,其后面的区域与立面保持一定距离,尽管实际高度很高,但仍能给人一种低层建筑结构的感觉。
The building has a closed area of 17.000 m2 on a rectangular plot of 6.200 m2. It houses production, research laboratory and office functions. The center is used by production engineers, technicians, students, lecturers and employees of incubator offices and thus special spatial arrangements are shaped by the needs of different groups, that eventually affects the massing. The elevations are divided by two horizontal flight lines and the areas directly behind it were kept a distance from the facade to create the perception of a low-rise building structure despite its actual height.
The building has a closed area of 17.000 m2 on a rectangular plot of 6.200 m2. It houses production, research laboratory and office functions. The center is used by production engineers, technicians, students, lecturers and employees of incubator offices and thus special spatial arrangements are shaped by the needs of different groups, that eventually affects the massing. The elevations are divided by two horizontal flight lines and the areas directly behind it were kept a distance from the facade to create the perception of a low-rise building structure despite its actual height.
© Yercekim Architectural Photography
第一层和入口层有服务和生产量的覆盖反射玻璃,以获得一个不透明的外观。另一方面,在办公室位于上面的楼层,透明的玻璃正面则倾向于远离单调的形式,并展示建筑物内人员的活动。建筑物一角的斜檐被认为是一个矛盾的三维元素,吸引用户和游客进入主入口大厅。
The first floor and the entrance floors with service and production volumes are covered with reflective glass to obtain an opaque facade. On the other hand, in the floors where the offices are located above, transparent glass facades are preferred to move away from a dull form and to exhibit the movements of people inside the building. The oblique eave on the corner of the building is considered a contradictory three-dimensional element that attracts users and visitors to the main entrance lobby.
The first floor and the entrance floors with service and production volumes are covered with reflective glass to obtain an opaque facade. On the other hand, in the floors where the offices are located above, transparent glass facades are preferred to move away from a dull form and to exhibit the movements of people inside the building. The oblique eave on the corner of the building is considered a contradictory three-dimensional element that attracts users and visitors to the main entrance lobby.
© Yercekim Architectural Photography
© Yercekim Architectural Photography
由于特殊的机械和电气要求,建筑物垂直分成两个不同的区域。机械和电气设备放置在第一地下室和屋顶露台。在整个结构周围使用膨胀的金属网格来隐藏屋顶上的机械装置。前两层专门用于生产活动;实验室、孵化室、会议室和班级位于三楼和四楼。5楼是作为社交场所的办公空间和休息室。服务及货物入口设于南面的地下一层,以分隔行人入口及车辆入口。
Due to the special mechanical and electrical requirements, the building is divided vertically into two separate zones. The mechanical and electrical equipment were placed in the first basement and the roof terrace. Expanded metal grids are used around the entire structure to hide the mechanical installation on the roof. While the first two floors are reserved for production-focused activities; laboratories, incubation rooms, meeting rooms, and classes are located on the 3rd and 4th floors. The 5th floor houses the office spaces and a lounge as a socializing area. Service and cargo entrances are placed in the first basement on the south to separate the pedestrian and vehicle entrances.
Due to the special mechanical and electrical requirements, the building is divided vertically into two separate zones. The mechanical and electrical equipment were placed in the first basement and the roof terrace. Expanded metal grids are used around the entire structure to hide the mechanical installation on the roof. While the first two floors are reserved for production-focused activities; laboratories, incubation rooms, meeting rooms, and classes are located on the 3rd and 4th floors. The 5th floor houses the office spaces and a lounge as a socializing area. Service and cargo entrances are placed in the first basement on the south to separate the pedestrian and vehicle entrances.
© Yercekim Architectural Photography
Architects Piramit Architects
Location Istanbul, Turkey
Lead Architect Mehmet Toydemir
Photographs Yercekim Architectural Photography
举报
别默默的看了,快登录帮我评论一下吧!:)
注册
登录
更多评论
相关文章
-
描边风设计中,最容易犯的8种问题分析
2018年走过了四分之一,LOGO设计趋势也清晰了LOGO设计
-
描边风设计中,最容易犯的8种问题分析
2018年走过了四分之一,LOGO设计趋势也清晰了LOGO设计
-
描边风设计中,最容易犯的8种问题分析
2018年走过了四分之一,LOGO设计趋势也清晰了LOGO设计